Now with the ability to manage 8 readers for In/Out requirements when using Mercury Powered firmware option and NXT Readers
The NXT-4D - Four Door/Eight Reader Controller is built for today's IT environments. With all Ethernet functionality built directly into the controller, Keri's proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration. By using an existing TCP/IP network, controller cabling costs can be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they can be reduced up to 50% over traditional hard-wired access systems. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any network's valuable bandwidth.
- 4 Door/8 Reader Controller for Keri's Doors NXT product line
- On-board TCP/IP - no network adapters required
- Reduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cable
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
- Embedded MAC Address for One button AutoConfiguration
- Built-In Tamper Input
- Standard 4 PIN Block and RJ Jack built-in for network connection
- Re-assignable Inputs and Outputs
- Flash Memory for easy firmware upgrades
- Up to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network
- 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
- Locking Metal Enclosure (optional without)
- 96 Bit Encryption
an ID Expert!